Step 5 – Place and Attach the Top BoardĪttach the top 14″x5 1/2 board using Brad Nails. Place both 2″x24″ boards on a flat surface, then using nail gun attach the 14″ boards with 1 1/4″ Brad Nails. Paint or stain all the boards before attaching them together. You might cut a different hole size depending on your flower pot. Using a jig saw cut a 3″ hole in the middle of 8″ x 3 1/2″ board. One side of the shelf will be cut at 35 degrees. Step 2 – Make Small Shelves for the Key OrganizerĬut two shelf boards to 5’圆′. Then set the table saw blade to 45 degrees and chamfer each board on both sides. Using a table saw cut eight boards to 14″ x 3″. See lumber sizes for actual dimensions vs nominal.ĭisclosure: Some of the links on this page as well as links in “tools for this project” and “material list” sections are affiliate links. Stained each of these pieces in Minwax English Chestnut and finished them with two coats of Minwax Polyurethane in Semigloss. I also attached the d-ring hardware on the back before doing any work to the front.Note: Lumber dimensions are listed as nominal size. As a reminder, my key rack measurements were 19 inches by 7.5 inches (it was a piece of 1×8) and 8 inches by 2.5 inches. Read my full terms of use here.) Step 1: Cut and stain woodįirst I cut my two pieces and sanded them. Do not use any tools without proper training, precautions, and supervision from a professional. Follow the directions and warnings from your particular brand. (Remember to wear a mask and eye protection while sanding and working with wood, and wear an appropriate mask while working with paints, stains, and finishes. Kylon spray paint in Metallic Gold and Colonial Ivory Chalky FinishĪnd here’s how I made my DIY wood key holder!.3″ diameter terracotta pot with a 1.5″ lip.Rust-Oleum spray paint in Oil-Rubbed Bronze.Flower Pot Clip, which I had left over from a previous project–remember to bring these to the store with you to make sure your pot’s lip fits.Screw hooks ( these are already painted in oil-rubbed bronze!).They are over $1 each at most big-box stores Chip brushes, great deal on those here at.Liquid Nails Heavy Duty Construction Adhesive and two clamps (use something else that’s heavy to apply pressure in a pinch).Minwax stain in English Chestnut and Polyurethane in Semigloss.Two pieces of wood one main piece (mine is 19″ x 7.5″) and one shelf piece (mine is 8″ long x 2.5″ deep).If you want to make a hanging wooden key holder, check out the supplies I used and steps I took below! That way we can ditch the bulletin board we have that’s usually half empty anyway. I think I’m going to add a little holder for envelopes for mine, though. When I hung it up in my apartment to get some pictures of it, I liked it so much that I decided I had to make one for myself! A week later, I ended up with this the masterpiece. She also asked if I could include a spot for her husband’s wallet, which he’s always losing. Her little girl is now old enough to reach the countertops, and keys have become a fun new toy for her (especially the car alarm button). Learn how to make a DIY wood key holderĪ few days ago, my friend texted me and asked if I could make her a key rack that she could hang on her wall to keep her keys away from her toddler. It has space for keys, keychains, and other small items like sunglasses. Learn how to make a DIY wood key holder that’s a perfect beginner woodworking project.
0 Comments
Leave a Reply. |