Once you have set all 4 meals, they will visible on the LCD display. Consider that the meal times intervals can be incremented only every 10 minutes. Then set the time for Meal 1 by pushing the UP or DOWN arrow buttons until the time you choose and then press ADJ/SET to save the setting.ĭo the same for all 4 meals. Then you press and hold the ADJ/SET button for 3 seconds until the Meal 1 starts to flash. To program the 1st meal you need to press UP or DOWN arrow buttons to move the highlight to Meal 1. Then you can start programming the meals. The first meal doesn’t need to be programmed as it is exposed to be served at present time.įirst thing is programming the clock. This schedule will be repeated every day so you only need to program the 4 meals once. You need to set the meals and times of each serving. PROGRAMMING THE MEALS & TIMES Cat eating from the Cat Mate C500 When setting the clock make sure the AM/PM is correct according to the time you are setting. To set the clock is easy, just push the button ADJ/SET for 5 seconds until the LCD screen starts flushing and then push the UP or DOWN arrow to set the time. The Cat Mate C500 LCD panel features the following displays & buttons: ![]() Place the battery and put the tray and top lid back on. Then you lift the food tray off the base and remove the battery cover by releasing the holding clip. To open the feeder you need to pressure down the lid and pushing in the spring clips on both sides at the same time. The first thing to do is installing the batteries. The feeder comes with 12 hours AM/PM by default. The feeder features a digital timer that can be set for 24 hours (military time) or 12 AM/PM. The unit works with batteries that may last up to 12 months if using good quality alkaline batteries and with normal use. Each tray holds enough food for two cats. One slot will be exposed in the beginning so you only need to program 4 meals. The 5-meal food tray will rotate exposing each meal at the programmed time.
0 Comments
Leave a Reply. |